Dry bioanalyzer
Dry bioanalyzer | |
Methodology | Reflectance Photometer |
Measurement Range | UA:0.090mmol/L~1.200mmol/L(1.51mg/dL~20.17mg/dL) CR:0.044mmol/L~1.320mmol/L(0.50mg/dL~14.93mg/dL) UR:0.90mmol/L~40.00mmol/L(5.41mg/dL~240.2mg/dL) TC:2.59mmol/L-12.93mmol/L(100mg/dL-500mg/dL) HDL:0.39mmol/L-2.59mmol/L(15mg/dL-100mg/dL) TG:0.51mmol/L-7.34mmol/L(45mg/dL-650mg/dL) KET:0.02mmol/L~6.00mmol/L(0.21mg/dL~62.46mg/dL) |
Specimen | Whole Blood(capillary and venous),plasma and serum |
Power Source | 1200mAh built-in lithium battery |
Battery Endurance | After cycle charge 300 times, electric quantity reduce 30% |
Units of Measurement | mmol/L, mg/dL |
Memory | 500 records |
Automatic Shut Off | 5 minutes after last use |
Meter Size | 135*66*19mm(L*W*H) |
Weight | 90g |
Meter Storage Conditions | 0-55℃；≤ 90% RH |
System Operating Conditions | 10-35℃；≤ 90%RH；altitude 2000m |
Test Strip Storage Conditions | 2～30℃;≤ 90% RH |
Warranty Period | 2 years |
Meter Shelf Life | 4 years |
Test Strip Shelf Life | 1 year |
Product Introduction
Movable Dry bioanalyzer is intended for the quantitative determination of Total Cholesterol (TC), High Density Lipoprotein Cholesterol (HDL),Triglycerides (TG), Uric Acid (UA), Creatinine (CR) and Urea (UR), Blood Ketone (KET) in capillary blood, venous whole blood, plasma and serum. Movable Dry bioanalyzer provides results. Dry bioanalyzer can store up to 500 results and records.
Quality Control
Each lab should use its own standards and procedures for performance. Test known specimens/controls at each of the following events in accordance with local, state, and/or federal regulations or accreditation requirements:
• When a new package of test strips is opened
• When a new operator uses the meter
• When test results seem inaccurate
• After performing maintenance or service on the meter If quality control tests do not provide expected results, perform the following checks:
• Ensure that the test strips used are not expired.
• Ensure that the test strips are fresh from a new canister or package.
• Ensure that the controls are not expired.
• Repeat the test to ensure no errors were made during the test
